skip to Main Content
DSCope Series USB-based Digital Oscilloscope

DSCope is a series of USB-based oscilloscope, up to 100MHz bandwidth, max 1GSa/s sample rate, 2M real-time and 256M single record length.

DSCope is small(115mmx74mmx16mm), and can be packed in a shirt pocket. Combined with big screen and powerful performance computer, DSCope series oscilloscope can provide you amazing signal capture and analyzer experience.

DSCopeU2P20
DSCopeU2P20
DSCopeU2P20 F2
DSCopeU2P20 F5
Dscope Typec Interface
DSCopeU2P20DSCopeU2P20 F2DSCopeU2P20 F5Dscope Typec Interface

$199.00 $179.00Add to cart

DSCope U2P20

Bandwidth

50MHz

Max Sample Rate

200MSa/s

Record Length

2M Real-time / 32M Single

Channels

2

Warranty

3-year

$249.00 $199.00Read more

DSCope U2B100

Bandwidth

100MHz

Max Sample Rate

1GSa/s

Record Length

20K Real-time / 32K Single

Channels

2

Warranty

3-year

$399.00 $299.00Add to cart

DSCope U3P100

Bandwidth

100MHz

Max Sample Rate

1GSa/s

Record Length

2M Real-time / 256M Single

Channels

2

Warranty

3-year

How to choose an OSCILLOSCOPE?

We have prepared A CHECKLIST for you

1. Stability and Safety

osc-key1-en

72 hours burn-in test

5 years,1800 days and nights,300 improvements

Patented Ground Protection technology

grounding-protection

Ground Protection: If you accidentally connect the ground terminal of probe to certain power supply *, the ground connection will be automatically disconnected to protect your oscilloscope and computer from damage.

* For specific protection range, please refer to the specifications of different products

2. Capture Rate and Delay

DSCope has a FPGA-based Waveform Processing Engine, similar to the desktop oscilloscope, instead of an MCU-based software implementation

High Capture Rate and Smooth Waveform

capture-rate-en

High Waveform Real-time Refresh Rate

DSView software can efficiently process waveforms and
display dynamic waveforms at a stable frame rate

fps-en

DSCope U3P100 support USB3.0 interface
Bandwidth up to 5Gbps10 times of USB 2.0
Achieve microsecond level transmission delay

usb20-30-speed-en

3. Bandwidth and Sample Rate

Analog front-end bandwidth up to 100MHz

front-end-bandwidth-en

Single-chip high-speed ADC instead of low-end splicing scheme

single-multiple-chip-en

Real-time sample rate up to 1GSa/s, not equivalent sample rate

Ideal Case
repetitive signal

Real Case
One time pulse

In the real world, most of signals we need to debug are
Not an ideal repetitive signal.

Equivalent sampling is ideal when observing the Perfect signals generated by the signal generator, but it may not work well in the real world, especially for digital circuits.

signal-path-en

We recommend a classic design:
Real-time sample rate should be 10 times the bandwidth of analog front-end circuits

4. Record Length

Under the same highest sample rate, different Record Length will lead to different waveforms.

Most oscilloscopes only mark the highest sample rate, But most of the time, actual sample rate depends on the Record Length.

Actual Sample Rate = min {Highest Sample Rate,Record Length/Record Time}

For example: the highest sample rate of oscilloscope A and B is the same 1GSa/s. If record length of A is 10K and B is 1M, then the actual sample rate of A is only 10MSa/s at 100us/div , the actual sample rate of B will remain at 1GSa/s

sample-rate-show-en

DSView always display the actual sample rate, providing an important reference for users

DSCope U3P100

DSCope U3P100 uses 2Gbits DDR3 memory
Record length up to 2Mpts for real-time acquisition
up to 256Mpts for single acquisition

record-length-show-en

Long-time acquisition without losing details

5. Vertical Sensitivity and Noise

DC/DC power supply ripple analysis

ripple-show-en

DSCope has a minimum vertical sensitivity of 10mv/div.
If a battery-powered notebook is used as a display terminal,
excellent noise performance can be obtained.

1mv-show-en

A screenshot shows weak signal of ±1mv@1MHz
DSCope is a sharp tool for power ripple measurement

calibration-show-en

DSCope support manual amplitude calibration
Lead to a higher vertical accuracy

bnc-voltage-range-en

With x100 high-voltage probe (not include),
DSCope can measure signal range of ± 1000v*

* Pay attention to right and safety grounding

6. Ease-of-Use

Big screen + High resolution

Mouse-based operations
Support touchpad gesture

Small screen + Low resolution

Messy keys and knobs

Multi-platform support
Driver with digital signature

osc-measure-en

Rich measurements
auto, manual, x cursors, y cursors, …

hmi-en-files

File & settings load/store
easy to review & share & reprocess

7. Feature Richness

osc-auto-measurements-en

Up to 20 Auto Measurements

fft-show-en

FFT-based Spectrum Analysis

math-show-en

Math Functions (add/subtract/multiply/divide)

lissajous-show-en

Lissajous Figure (X-Y mode)

osc-measure-en

Rich measurements
auto, manual, x cursors, y cursors, …

daq-show-en

Data Acquisition Mode
long time continuous Record (>24hours@1KHz)

8. Portability

dscope-size-show

Oscilloscope in your pocket

metal-cases

CNC Aluminum Case

fanless-noise-show

Fanless Design, No Noise

dscope-usb-connection

USB powered, plug and play

END

Back To Top