Shop - DreamSourceLab https://www.dreamsourcelab.com Wed, 18 Feb 2026 23:32:52 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 DSTouch DS4T1012 https://www.dreamsourcelab.com/shop/oscilloscope/dstouch-ds4t1012/?utm_source=rss&utm_medium=rss&utm_campaign=dstouch-ds4t1012 https://www.dreamsourcelab.com/shop/oscilloscope/dstouch-ds4t1012/#_comments Fri, 26 May 2023 07:37:50 +0000 http://www.dreamsourcelab.com/?post_type=product&p=9637 150Mhz Analog Bandwidth

Maximum sampling rate 1GSa/s

Maximum storage depth  16Mpts

Support FFT spectrum analysis.

Support real-time protocol decoding

Support signal generator function

Ultimate portability (117x77x20mm)

1-year warranty

The post DSTouch DS4T1012 first appeared on DreamSourceLab.

]]>

Main Features:

  • Dual channels
  • 150MHz analog bandwidth
  • Maximum sampling rate 1GSa/s
  • Maximum storage depth 16Mpts
  • Support FFT spectrum analysis
  • Support real-time protocol decoding
  • Support signal generator function
  • 4.3-inch IPS capacitive touch screen
  • Ultimate portability (117x77x20mm)
  • Large capacity lithium battery

External Interfaces：

  • Type-C USB interface (for charging and connecting to PC as a USB drive)
  • Mini HDMI (customized function expansion interface, not for display extension)
  • 3 buttons (Power/Start-Stop/Auto)
  • 2 indicator lights (Power/Charging)
  • 1 MCX interface (signal generator)
  • 2 BNC interfaces (standard probe interface + Pogo Pin extended contact points)
  • Probe compensation test signal (~1KHz square wave + ground terminal)

Charging Requirements

  • Charging voltage: 5VDC±5%
  • Charging current: maximum 2A

Technical specifications

Vertical System：

Analog Bandwidth: 150MHz
Input Coupling: DC or AC
Input Impedance: 1MΩ // ~17pF
Vertical Sensitivity Range: 10mV/Div to 5V/Div
Vertical Resolution: 8bits
Maximum Input Range: peaks ≤ 200V
DC Gain Accuracy: ±4%
Vertical Position: ±4 divisions
Vertical Offset: Volts/Div setting                Range after offset
10mV/Div ~ 5V/Div          ±80mV ~ ±40V/Div
Common Mode Rejection Ratio (CMRR): —
Channel Isolation: —

Horizontal System

Maximum Sampling Rate (Single Channel): 1GSa/s
Maximum Sampling Rate (Dual Channel): 500MSa/s
Time Base Range: 1ns/Div to 10s/Div
Acquisition Duration at Maximum Sampling Rate: 10ms
Storage Depth: 8Mpts (dual channel)
16Mpts (single channel)

Trigger System

Trigger Modes: Auto
Normal (ch0, ch1)
Trigger Position: 0% ~100% of the Sampling Depth
Holdoff Range: 0 ~ 1 s
Trigger Types: Edge (rising/falling)
Trigger Sensitivity: 0 ~ 0.5 divisions
Trigger Level Range: ±3.75 divisions

Waveform Measurements

Manual Measurements: PulseWidth / Frequency / Period
Voltage Amplitude
Automatic Measurements: Frequency / Period / +Duty Cycle / -Duty Cycle / +Pulse Count
Rising / Falling / +Pulse Width/ -Pulse Width / Burst Width
Amplitude / High Level / Low Level / RMS / Average
Peak-Peak/ Maximum / Minimum / +Overshot / -Overshot
Cursor Measurements: X cursor
Y cursor

Waveform display

Time-domain waveform: Real-time waveform
Single acquisition
X-Y mode: Lissajous figure
Persistence mode: 2-level dynamic persistence

Waveform analysis

FFT： Spectrum
Frequency range: 1Hz – 999MHz
Vertical ruler: Linear RMS or DBV RMS
Window function: Rectangle, Hann, Hamming, Blackman, Flat_top
Protocol decoding: Real-time protocol decoding
Supported protocols: Uart / I2C / SPI / …
Formats：Decimal / Hexadecimal / ASCII

Signal Generation

Waveform types: Sine / Square / Triangle / Sawtooth
Frequency range: 0 – 100KHz (adjustable)
Amplitude range: 0.5V – 3V (adjustable)
Duty cycle: 10% – 90% (adjustable)

What’s in the Box

  • DSTouch DS4T1012 x1
  • USB Data Cable x1
  • 200MHz Bandwidth Probes x2
  • MCX to BNC Signal Cable x1
  • Carrying Case x1

The post DSTouch DS4T1012 first appeared on DreamSourceLab.

]]> https://www.dreamsourcelab.com/shop/oscilloscope/dstouch-ds4t1012/feed/ 0 DSTouch DS4T252 https://www.dreamsourcelab.com/shop/oscilloscope/dstouch-ds4t252/?utm_source=rss&utm_medium=rss&utm_campaign=dstouch-ds4t252 https://www.dreamsourcelab.com/shop/oscilloscope/dstouch-ds4t252/#_comments Fri, 26 May 2023 06:47:30 +0000 http://www.dreamsourcelab.com/?post_type=product&p=9642 50Mhz Analog Bandwidth

Maximum sampling rate 200MSa/s

Minimum vertical resolution  1mV/DIV

Maximum storage depth 2Mpts

Support FFT spectrum analysis

Support real-time protocol decoding

Support signal generator function

Ultimate portability (117x77x20mm)

1-year warranty  

The post DSTouch DS4T252 first appeared on DreamSourceLab.

]]>

 

 

Main Features:

  • Dual channels
  • 50MHz analog bandwidth
  • Maximum sampling rate 200MSa/s
  • Maximum storage depth 2Mpts
  • Minimum 1mV/DIV vertical resolution
  • Support FFT spectrum analysis
  • Support real-time protocol decoding
  • Support signal generator function
  • 4.3-inch IPS capacitive touch screen
  • Ultimate portability (117x77x20mm)
  • Large capacity lithium battery

External Interfaces：

  • Type-C USB interface (for charging and connecting to PC as a USB drive)
  • Mini HDMI (customized function expansion interface, not for display extension)
  • 3 buttons (Power/Start-Stop/Auto)
  • 2 indicator lights (Power/Charging)
  • 1 MCX interface (signal generator)
  • 2 BNC interfaces (standard probe interface + Pogo Pin extended contact points)
  • Probe compensation test signal (~1KHz square wave + ground terminal)

Charging Requirements

  • Charging voltage: 5VDC±5%
  • Charging current: maximum 2A

Vertical System：

Analog Bandwidth: 50MHz
Input Coupling: DC or AC
Input Impedance: 1MΩ // ~17pF
Vertical Sensitivity Range: 1mV/Div to 5V/Div
Vertical Resolution: 8bits
Maximum Input Range: peaks ≤ 200V
DC Gain Accuracy: ±4%
Vertical Position: ±4 divisions
Vertical Offset: Volts/Div setting                Range after offset
1mV/Div ~ 5V/Div              ±8mV ~ ±40V/Div
Common Mode Rejection Ratio (CMRR): —
Channel Isolation: —

Horizontal System

Maximum Sampling Rate (Single Channel): 200MSa/s
Maximum Sampling Rate (Dual Channel): 100MSa/s
Time Base Range: 5ns/Div to 10s/Div
Acquisition Duration at Maximum Sampling Rate: 10ms
Storage Depth: 1Mpts (dual channel)
2Mpts (single channel)

Trigger System

Trigger Modes: Auto
Normal (ch0, ch1)
Trigger Position: 0% ~100% of the acquisition depth
Holdoff Range: 0 ~ 1 s
Trigger Types: Edge (rising/falling)
Trigger Sensitivity: 0 ~ 0.5 divisions
Trigger Level Range: ±3.75 divisions

Waveform Measurements

Manual Measurements: PulseWidth / Frequency / Period
Voltage Amplitude
Automatic Measurements: Frequency / Period / +Duty Cycle / -Duty Cycle / +Pulse Count
Rising / Falling / +Pulse Width/ -Pulse Width / Burst Width
Amplitude / High Level / Low Level / RMS / Average
Peak-Peak/ Maximum / Minimum / +Overshot / -Overshot
Cursor Measurements: X cursor
Y cursor

Waveform display

Time-domain waveform: Real-time waveform
Single acquisition
X-Y mode: Lissajous figure
Persistence mode: 2-level dynamic persistence

Waveform analysis

FFT： Spectrum
Frequency range: 1Hz – 999MHz
Vertical ruler: Linear RMS or DBV RMS
Window function: Rectangle, Hann, Hamming, Blackman, Flat_top
Protocol decoding: Real-time protocol decoding
Supported protocols: Uart / I2C / SPI / …
Formats：Decimal / Hexadecimal / ASCII

Signal Generation

Waveform types: Sine / Square / Triangle / Sawtooth
Frequency range: 0 – 100KHz (adjustable)
Amplitude range: 0.5V – 3V (adjustable)
Duty cycle: 10% – 90% (adjustable)

Product List

  •  DSTouch DS4T252 Host x1
  • USB Data Cable x1
  • 60MHz Bandwidth Probes x2
  • MCX to BNC Signal Cable x1
  •  Carrying Case x1

The post DSTouch DS4T252 first appeared on DreamSourceLab.

]]> https://www.dreamsourcelab.com/shop/oscilloscope/dstouch-ds4t252/feed/ 0 P2200 Probes https://www.dreamsourcelab.com/shop/accessories/p2200-probes/?utm_source=rss&utm_medium=rss&utm_campaign=p2200-probes https://www.dreamsourcelab.com/shop/accessories/p2200-probes/#_comments Fri, 21 Feb 2020 08:51:40 +0000 http://www.dreamsourcelab.com/?post_type=product&p=6825  

The post P2200 Probes first appeared on DreamSourceLab.

]]> 2x P6200 probes

Model P2200
Attenuation 1X / 10X
Bandwidth 1X:DC-6MHz  / 10X: DC-200MHz
Rise time 1.75ns
Input resistance 1MΩ / 10MΩ ±1%
Input capacitance 1X:70pF~120pF / 10X:13pF~17pF
Compensation scope 10pF~35pF
Input voltage 1X:<200VDC + AC Vp-p / 10X:<600VDC+ AC Vp-p
Operating Temperature 0°C~+50°C
Non-Operating Temperature -20°C~+60°C
Technology Integration of injection molding
Color Black
Weight about 55g
Cable length 110±2cm
Humidity ≤80%(Relative humidity)

 

The post P2200 Probes first appeared on DreamSourceLab.

]]> https://www.dreamsourcelab.com/shop/accessories/p2200-probes/feed/ 0 DSCope U3P100 https://www.dreamsourcelab.com/shop/oscilloscope/dscope-u3p100/?utm_source=rss&utm_medium=rss&utm_campaign=dscope-u3p100 https://www.dreamsourcelab.com/shop/oscilloscope/dscope-u3p100/#_comments Tue, 18 Feb 2020 10:11:46 +0000 http://www.dreamsourcelab.com/?post_type=product&p=6726 [font_awesome link="" icon="star" color="000" size="16px"]100MHz bandwidth

[font_awesome link="" icon="star" color="000" size="16px"] Up to 1GSa/s sample rate

[font_awesome link="" icon="star" color="000" size="16px"] Up to 2Gbit DDR3 memory

[font_awesome link="" icon="star" color="000" size="16px"] USB 3.0 bandwidth up to 5Gpbs

[font_awesome link="" icon="star" color="000" size="16px"] Ultra-portable size

[font_awesome link="" icon="star" color="000" size="16px"] Unibody aluminum case

[font_awesome link="" icon="star" color="000" size="16px"]1-year warranty

The post DSCope U3P100 first appeared on DreamSourceLab.

]]>  

Key Features

  • 2 analog channels
  • USB 3.0 interface
  • 100MHz bandwidth
  • Up to 1GSa/s sample rate
  • Up to 2Gbits hardware memory
  • Ultra-portable size
  • Unibody aluminum case
  • 1-year warranty

Connectivity

  • Main Type-C USB 3.0 interface
  • Auxiliary Type-C USB interface
  • BNC connectors (Standard Probe Interface)
  • Extension interface (Pogo Pin Connector)

Power Source

  • Power source voltage: 5VDC±5%
  • Power consumption: 4W maximum

Input output ports

Direction Descriptions Protected Voltage Range
USB 3.0 port InOut Connect to host computer 4.75v ~ 5.25v
Auxiliary USB power port Input Auxiliary power 4.5v ~ 5.5v
BNC connectors Input Connect to probes -100v ~ +100v (DC+AC)
Extension interface InOut Extension probes and module 0-3.3v
Probe compensator Output 3v // ~1KHz square wave —

Designed to make your work enjoyable

DSCope U3P100 is an USB-based digital oscilloscope, which has a portable size (115x74x16mm), but powerful performance (up to 1GHz sample rate, USB 3.0 interface). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the analog wave and its frequency spectrum at anywhere and anytime.

Technical Specifications

Vertical system

Bandwidth: 100MHz
Input coupling: DC or AC
Input impedance: 1MΩ // ~16pF
Input sensitivity range: 10mV/Div to 2V/Div
Vertical resolution: 8bits
Maximum input voltage: peaks ≤ ±100V
DC gain accuracy: ±6%
Vertical position range: ±5 divisions
Vertical offset ranges: Volts/Div setting                      Offset rang
10mV/Div ~ 2V/Div                            ±100mV ~ ±20V/Div
Common mode rejection ratio(CMRR): —
Channel-to-channel isolation: —

Horizontal system

Maximum sample rate(single channel): 1GSa/s
Maximum sample rate(dual channel): 500MSa/s
Time base range: 2ns/Div to 10s/Div
Maximum duration of time
captured at highest sample rate (all channels):		 2ms (real-time capture)
200ms (single capture)
Record Length (real-time capture): 1Mpts (2 channels enabled)
2Mpts (1 channel enabled)
Record Length (single capture): 128Mpts (2 channels enabled)
256Mpts (1 channel enabled)

Trigger system

Trigger mode: Auto
Normal (ch0, ch1, ch0 & ch1, ch0 || ch1)
Trigger position range: 1% ~ 99% of record length
Trigger holdoff range: 1 us ~ 10 s
Trigger types: Edge (rising or falling)
Sensitivity: 0 ~ 0.625 vertical division
Trigger level ranges: ±4.4 vertical division from center screen

Waveform measurements

Cursors: Horizontal Width/Frequency/Period/Duty
Vertical Amplitude
Automated measurements: Frequency / Period / +Duty /- Duty / +Count
Rise / Fall / +Width / -Width / BrstW
Amplitude / High / Low / RMS / Mean
Pk-Pk / Max / Min / +Over / -OVer

Waveform math

FFT: Spectrum magnitude
Length: 1K ~ 16K
Vertical scale: Linear RMS or DBV RMS
Window: Rectangle, Hann, Hamming, Blackman, Flat_top
Math: Add / Subtract / Multiply / Divide

Waveform display

Time domain: Real-time viewSingle capture view
X-Y mode: Lissajous Figure

System Requirements

  • Windows XP, Vista, Win7, Win8 & Win10
  • Mac OS X 10.12 or above
  • Linux: recent Ubuntu, Fedora, Arch, etc.
  • USB 3.0 Host port

What’s in the Box

  • DSCope U3P100 (fully tested)
  • x2 USB 3.0 cable(1.0M length, A to Type-C)
  • x2 P2200 probes
  • x1 Carrying Case
  • Software not included — download here

The post DSCope U3P100 first appeared on DreamSourceLab.

]]> https://www.dreamsourcelab.com/shop/oscilloscope/dscope-u3p100/feed/ 0 DSCope U2B100 https://www.dreamsourcelab.com/shop/oscilloscope/dscope-u2b100/?utm_source=rss&utm_medium=rss&utm_campaign=dscope-u2b100 https://www.dreamsourcelab.com/shop/oscilloscope/dscope-u2b100/#_comments Tue, 18 Feb 2020 10:11:42 +0000 http://www.dreamsourcelab.com/?post_type=product&p=6725 [font_awesome link="" icon="star" color="000" size="16px"]100MHz bandwidth

[font_awesome link="" icon="star" color="000" size="16px"] Up to 1GSa/s sample rate

[font_awesome link="" icon="star" color="000" size="16px"] Ultra-portable size

[font_awesome link="" icon="star" color="000" size="16px"] Unibody aluminum case

[font_awesome link="" icon="star" color="000" size="16px"]1-year warranty

The post DSCope U2B100 first appeared on DreamSourceLab.

]]>  

Key Features

  • 2 analog channels
  • 100MHz bandwidth
  • Up to 1GSa/s sample rate
  • Ultra-portable size
  • Unibody aluminum case
  • 1-year warranty

Connectivity

  • Main Type-C USB 2.0 interface
  • Auxiliary Type-C USB interface
  • BNC connectors (Standard Probe Interface)

Power Source

  • Power source voltage: 5VDC±5%
  • Power consumption: 2.5 W maximum

Input output ports

Direction Descriptions Protected Voltage Range
USB 2.0 port InOut Connect to host computer 4.75v ~ 5.25v
BNC connectors Input Connect to probes -100v ~ +100v (DC+AC)
Probe compensator Output 3v // ~1KHz square wave —

Designed to make your work enjoyable

DSCope U2B100 is an USB-based digital oscilloscope, which has a portable size (115x74x16mm), but powerful performance (up to 1GHz sample rate). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the analog wave and its frequency spectrum at anywhere and anytime.

Technical Specifications

Vertical system

Bandwidth: 100MHz
Input coupling: DC or AC
Input impedance: 1MΩ // ~16pF
Input sensitivity range: 10mV/Div to 2V/Div
Vertical resolution: 8bits
Maximum input voltage: peaks ≤ ±100V
DC gain accuracy: ±6%
Vertical position range: ±5 divisions
Vertical offset ranges: Volts/Div setting                      Offset rang
10mV/Div ~ 2V/Div                            ±100mV ~ ±20V/Div
Common mode rejection ratio(CMRR): —
Channel-to-channel isolation: —

Horizontal system

Maximum sample rate(single channel): 1GSa/s
Maximum sample rate(dual channel): 500MSa/s
Time base range: 2ns/Div to 100ms/Div
Maximum duration of time
captured at highest sample rate (all channels):		 20us (real-time capture)
32us (single capture)
Record Length (real-time capture): 10Kpts (2 channels enabled)
20Kpts (1 channel enabled)
Record Length (single capture): 16Kpts (2 channels enabled)
32Kpts (1 channel enabled)

Trigger system

Trigger mode: Auto
Normal (ch0, ch1, ch0 & ch1, ch0 || ch1)
Trigger position range: 1% ~ 99% of record length
Trigger holdoff range: 1 us ~ 10 s
Trigger types: Edge (rising or falling)
Sensitivity: 0 ~ 0.625 vertical division
Trigger level ranges: ±4.4 vertical division from center screen

Waveform measurements

Cursors: Horizontal Width/Frequency/Period/Duty
Vertical Amplitude
Automated measurements: Frequency / Period / +Duty /- Duty / +Count
Rise / Fall / +Width / -Width / BrstW
Amplitude / High / Low / RMS / Mean
Pk-Pk / Max / Min / +Over / -OVer

Waveform math

FFT: Spectrum magnitude
Length: 1K ~ 8K
Vertical scale: Linear RMS or DBV RMS
Window: Rectangle, Hann, Hamming, Blackman, Flat_top
Math: Add / Subtract / Multiply / Divide

Waveform display

Time domain: Real-time viewSingle capture view
X-Y mode: Lissajous Figure

System Requirements

  • Windows XP, Vista, Win7, Win8 & Win10
  • Mac OS X 10.12 or above
  • Linux: recent Ubuntu, Fedora, Arch, etc.
  • USB 2.0 Host port

What’s in the Box

  • DSCope U2B100 (fully tested)
  • x1 USB cable(1.0M length, A to Type-C)
  • x2 P2200 probes
  • x1 Carrying Case
  • Software not included — download here

The post DSCope U2B100 first appeared on DreamSourceLab.

]]> https://www.dreamsourcelab.com/shop/oscilloscope/dscope-u2b100/feed/ 0 DSLogic U3Pro32 https://www.dreamsourcelab.com/shop/logic-analyzer/dslogic-u3pro32/?utm_source=rss&utm_medium=rss&utm_campaign=dslogic-u3pro32 https://www.dreamsourcelab.com/shop/logic-analyzer/dslogic-u3pro32/#_comments Tue, 18 Feb 2020 10:11:40 +0000 http://www.dreamsourcelab.com/?post_type=product&p=6721 [font_awesome link="" icon="star" color="000" size="16px"] Up to 1GHz sample rate

[font_awesome link="" icon="star" color="000" size="16px"] Up to 32 digital channels

[font_awesome link="" icon="star" color="000" size="16px"] USB 3.0 bandwidth up to 5Gbps

[font_awesome link="" icon="star" color="000" size="16px"] Adjustable Threshold (0.1V Step)

[font_awesome link="" icon="star" color="000" size="16px"] Shielded fly wires

[font_awesome link="" icon="star" color="000" size="16px"] Unibody aluminum case

[font_awesome link="" icon="star" color="000" size="16px"]1-year warranty

The post DSLogic U3Pro32 first appeared on DreamSourceLab.

]]>

Key Features

  • 32 digital channels
  • USB 3.0 interface
  • Up to 1GHz sample rate
  • Up to 2Gbits hardware memory
  • Up to 16G sample depth (stream mode)
  • Adjustable Threshold (0.1V Step)
  • Shielded fly wires
  • Unibody aluminum case
  • 1-year warranty

Connectivity

  • USB Type-C interface (USB 3.0 device port)
  • 1.27mm dupont female connector (Host device)
  • 2.54mm dupont female connector (Fly wires)

Power Source

  • Power source voltage: 5VDC±5%
  • Power consumption: 2 W maximum

Input output ports

Direction Descriptions Protected Voltage Range
USB 3.0 port InOut Connect to host computer 4.75v ~ 5.25v
CH0 ~ CH31 Input Connect to under test signals -30v ~ 30v (with fly wires)
CK Input Clock input at state sample mode 0v ~ 3.3v (Max 50MHz)
TI Input External trigger signal input 0v ~ 3.3v
TO Output External trigger signal output —

Designed to make your work enjoyable

DSLogic U3Pro32 is an USB-based logic analyzer, which has a portable size (79x74x9mm), but powerful performance (up to 1GHz sample rate, USB 3.0 interface). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the digital wave and decoder various protocols at anywhere and anytime.

Technical Specifications

Input Voltage and Thresholds

Operation voltage range: -0.9v ~ 6v
Threshold voltage: 0v ~ 5v (0.1v step)
Work with most of logic voltage level (such as: 5v, 3.3v, 2.5v, 1.8v, 1.5v, 1.2v, 1.0v, etc.)
ESD protected

Input Impedance

250KΩ // ~13pF

Max Sample Rates

Buffer mode Stream mode
8 channels: 1GHz 3 channels: 1GHz
16 channels: 500MHz 6 channels: 500MHz
32 channels: 250MHz 12 channels: 250MHz
— 30 channels: 100MHz
— 32 channels: 50MHz

Max Sample Depth

Buffer mode (without RLE compression): 2G / num. of channels
Buffer mode (with RLE compression): 16G / num. of channles
Stream mode: 16G

Error/Accuracy

Minimum acquisition pulse: 2ns
Acquisition Accuracy: ±sample interval (for example: ±10ns@100M sample rate, ±1us@1M sample rate)

Noise Immunity

Each channel provides independent shielding ground.

System Requirements

  • Windows XP, Vista, Win7, Win8 & Win10
  • Mac OS X 10.12 or above
  • Linux: recent Ubuntu, Fedora, Arch, etc.
  • USB 3.0 Host port

What’s in the Box

  • DSLogic U3Pro32 (fully tested)
  • x1 USB 3.0 cable(0.8M length, A to Type-C)
  • x8+1 Shielded fly wires
  • x32 Hook Clips
  • x1 Carrying Case
  • Software not included — download here

The post DSLogic U3Pro32 first appeared on DreamSourceLab.

]]> https://www.dreamsourcelab.com/shop/logic-analyzer/dslogic-u3pro32/feed/ 0 DSLogic U3Pro16 https://www.dreamsourcelab.com/shop/logic-analyzer/dslogic-u3pro16/?utm_source=rss&utm_medium=rss&utm_campaign=dslogic-u3pro16 https://www.dreamsourcelab.com/shop/logic-analyzer/dslogic-u3pro16/#_comments Tue, 18 Feb 2020 10:11:35 +0000 http://www.dreamsourcelab.com/?post_type=product&p=6720 [font_awesome link="" icon="star" color="000" size="16px"] Up to 1GHz sample rate

[font_awesome link="" icon="star" color="000" size="16px"] Up to 16 digital channels

[font_awesome link="" icon="star" color="000" size="16px"] USB 3.0 bandwidth up to 5Gbps

[font_awesome link="" icon="star" color="000" size="16px"] Adjustable Threshold (0.1V Step)

[font_awesome link="" icon="star" color="000" size="16px"] Shielded fly wires

[font_awesome link="" icon="star" color="000" size="16px"] Unibody aluminum case

[font_awesome link="" icon="star" color="000" size="16px"]1-year warranty

The post DSLogic U3Pro16 first appeared on DreamSourceLab.

]]>

Key Features

  • 16 digital channels
  • USB 3.0 interface
  • Up to 1GHz sample rate
  • Up to 2Gbits hardware memory
  • Up to 16G sample depth (stream mode)
  • Adjustable Threshold (0.1V Step)
  • Shielded fly wires
  • Unibody aluminum case
  • 1-year warranty

Connectivity

  • USB Type-C interface (USB 3.0 device port)
  • 1.27mm dupont female connector (Host device)
  • 2.54mm dupont female connector (Fly wires)

Power Source

  • Power source voltage: 5VDC±5%
  • Power consumption: 2.5 W maximum

Input output ports

Direction Descriptions Protected Voltage Range
USB 3.0 port InOut Connect to host computer 4.75v ~ 5.25v
CH0 ~ CH15 Input Connect to under test signals -30v ~ 30v (with fly wires)
CK Input Clock input at state sample mode 0v ~ 3.3v (Max 50MHz)
TI Input External trigger signal input 0v ~ 3.3v
TO Output External trigger signal output —

Designed to make your work enjoyable

DSLogic U3Pro16 is an USB-based logic analyzer, which has a portable size (79x74x9mm), but powerful performance (up to 1GHz sample rate, USB 3.0 interface). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the digital wave and decoder various protocols at anywhere and anytime.

Technical Specifications

Input Voltage and Thresholds

Operation voltage range: -0.9v ~ 6v
Threshold voltage: 0v ~ 5v (0.1v step)
Work with most of logic voltage level (such as: 5v, 3.3v, 2.5v, 1.8v, 1.5v, 1.2v, 1.0v, etc.)
ESD protected

Input Impedance

250KΩ // ~13pF

Max Sample Rates

Buffer mode Stream mode
8 channels: 1GHz 3 channels: 1GHz
16 channels: 500MHz 6 channels: 500MHz
— 12 channels: 250MHz
— 16 channels: 125MHz

Buffer mode: 1GHz when using 8 channels, 500MHz when using 16 channels
Stream mode: 1GHz when using 3 channels, 500MHz when using 6 channels, 250MHz when using 12 channels, 125MHz when using 16 channels

Max Sample Depth

Buffer mode (without RLE compression): 2G / num. of channels
Buffer mode (with RLE compression): 16G / num. of channels
Stream mode: 16G

Error/Accuracy

Minimum acquisition pulse: 2ns
Acquisition Accuracy: ±sample interval (for example: ±10ns@100M sample rate, ±1us@1M sample rate)

Noise Immunity

Each channel provides independent shielding ground.

System Requirements

  • Windows XP, Vista, Win7, Win8 & Win10
  • Mac OS X 10.12 or above
  • Linux: recent Ubuntu, Fedora, Arch, etc.
  • USB 3.0 Host port

What’s in the Box

  • DSLogic U3Pro16 (fully tested)
  • x1 USB 3.0 cable(0.8M length, A to Type-C)
  • x4+1 Shielded fly wires
  • x16 Hook Clips
  • x1 Carrying Case
  • Software not included — download here

The post DSLogic U3Pro16 first appeared on DreamSourceLab.

]]> https://www.dreamsourcelab.com/shop/logic-analyzer/dslogic-u3pro16/feed/ 0 Hook Clips x16 https://www.dreamsourcelab.com/shop/accessories/clips/?utm_source=rss&utm_medium=rss&utm_campaign=clips Thu, 03 Aug 2017 07:39:22 +0000 http://59.110.241.170/?post_type=product&p=5262  

The post Hook Clips x16 first appeared on DreamSourceLab.

]]> 16 hook clips

The post Hook Clips x16 first appeared on DreamSourceLab.

]]> Shielded fly wires https://www.dreamsourcelab.com/shop/accessories/shielded-fly-wires/?utm_source=rss&utm_medium=rss&utm_campaign=shielded-fly-wires Thu, 03 Aug 2017 07:34:01 +0000 http://59.110.241.170/?post_type=product&p=5261  

The post Shielded fly wires first appeared on DreamSourceLab.

]]>

The post Shielded fly wires first appeared on DreamSourceLab.

]]> P6060 Probes https://www.dreamsourcelab.com/shop/accessories/p6060-probes/?utm_source=rss&utm_medium=rss&utm_campaign=p6060-probes Thu, 03 Aug 2017 07:32:54 +0000 http://59.110.241.170/?post_type=product&p=5260  

The post P6060 Probes first appeared on DreamSourceLab.

]]> 2x P6060 probes

Model P6060
Attenuation 1X / 10X
Bandwidth 1X:DC-6MHz  / 10X: DC-60MHz
Rise time 5.8ns
Input resistance 1MΩ / 10MΩ ±2%
Input capacitance 1X:70pF~120pF / 10X:14pF~18pF
Compensation scope 15pF~45pF
Input voltage 1X:<200VDC + AC Vp-p / 10X:<600VDC+ AC Vp-p
Operating Temperature 0°C~+50°C
Non-Operating Temperature -20°C~+60°C
Technology Integration of injection molding
Color Gray
Weight about 55g
Cable length 110±2cm
Humidity ≤80%(Relative humidity)

The post P6060 Probes first appeared on DreamSourceLab.

]]>