“DSCope U3P100” has been added to your cart. View cart →
Sale
DSTouch DS4T1012
Original price was: $399.00.$249.00Current price is: $249.00.
150Mhz Analog Bandwidth
Maximum sampling rate 1GSa/s
Maximum storage depth 16Mpts
Support FFT spectrum analysis.
Support real-time protocol decoding
Support signal generator function
Ultimate portability (117x77x20mm)
1-year warranty
In stock
Description
Main Features:
- Dual channels
- 150MHz analog bandwidth
- Maximum sampling rate 1GSa/s
- Maximum storage depth 16Mpts
- Support FFT spectrum analysis
- Support real-time protocol decoding
- Support signal generator function
- 4.3-inch IPS capacitive touch screen
- Ultimate portability (117x77x20mm)
- Large capacity lithium battery
External Interfaces：
- Type-C USB interface (for charging and connecting to PC as a USB drive)
- Mini HDMI (customized function expansion interface, not for display extension)
- 3 buttons (Power/Start-Stop/Auto)
- 2 indicator lights (Power/Charging)
- 1 MCX interface (signal generator)
- 2 BNC interfaces (standard probe interface + Pogo Pin extended contact points)
- Probe compensation test signal (~1KHz square wave + ground terminal)
Charging Requirements
- Charging voltage: 5VDC±5%
- Charging current: maximum 2A
Technical specifications
Vertical System：
| Analog Bandwidth: | 150MHz |
| Input Coupling: | DC or AC |
| Input Impedance: | 1MΩ // ~17pF |
| Vertical Sensitivity Range: | 10mV/Div to 5V/Div |
| Vertical Resolution: | 8bits |
| Maximum Input Range: | peaks ≤ 200V |
| DC Gain Accuracy: | ±4% |
| Vertical Position: | ±4 divisions |
| Vertical Offset: | Volts/Div setting Range after offset 10mV/Div ~ 5V/Div ±80mV ~ ±40V/Div |
| Common Mode Rejection Ratio (CMRR): | — |
| Channel Isolation: | — |
Horizontal System
| Maximum Sampling Rate (Single Channel): | 1GSa/s |
| Maximum Sampling Rate (Dual Channel): | 500MSa/s |
| Time Base Range: | 1ns/Div to 10s/Div |
| Acquisition Duration at Maximum Sampling Rate: | 10ms |
| Storage Depth: | 8Mpts (dual channel) 16Mpts (single channel) |
Trigger System
| Trigger Modes: | Auto Normal (ch0, ch1) |
| Trigger Position: | 0% ~100% of the Sampling Depth |
| Holdoff Range: | 0 ~ 1 s |
| Trigger Types: | Edge (rising/falling) |
| Trigger Sensitivity: | 0 ~ 0.5 divisions |
| Trigger Level Range: | ±3.75 divisions |
Waveform Measurements
| Manual Measurements: | PulseWidth / Frequency / Period Voltage Amplitude |
| Automatic Measurements: | Frequency / Period / +Duty Cycle / -Duty Cycle / +Pulse Count Rising / Falling / +Pulse Width/ -Pulse Width / Burst Width Amplitude / High Level / Low Level / RMS / Average Peak-Peak/ Maximum / Minimum / +Overshot / -Overshot |
| Cursor Measurements: | X cursor Y cursor |
Waveform display
| Time-domain waveform: | Real-time waveform Single acquisition |
| X-Y mode: | Lissajous figure |
| Persistence mode: | 2-level dynamic persistence |
Waveform analysis
| FFT： | Spectrum Frequency range: 1Hz – 999MHz Vertical ruler: Linear RMS or DBV RMS Window function: Rectangle, Hann, Hamming, Blackman, Flat_top |
| Protocol decoding: | Real-time protocol decoding Supported protocols: Uart / I2C / SPI / … Formats：Decimal / Hexadecimal / ASCII |
Signal Generation
| Waveform types: | Sine / Square / Triangle / Sawtooth |
| Frequency range: | 0 – 100KHz (adjustable) |
| Amplitude range: | 0.5V – 3V (adjustable) |
| Duty cycle: | 10% – 90% (adjustable) |
What’s in the Box
- DSTouch DS4T1012 x1
- USB Data Cable x1
- 200MHz Bandwidth Probes x2
- MCX to BNC Signal Cable x1
- Carrying Case x1
Leave a customer review
You must be logged in to post a review.
Reviews
There are no reviews yet.